Switched Adjustable Power Supply 120W - ALF1210

Switched Adjustable Power Supply 120 WATTS - ALF1210. 12 V - 10 A (adj. 10 to 15 V / 10 A). ON/OFF switch. Safety according to EN61000-3-2. Power-on LED indicators.

Ask About This Product

Description

Switched Adjustable Power Supply 120 WATTS - ALF1210
12 V - 10 A
(Adj. 10 to 15 V / 10 A)
ON/OFF switch
Safety according to EN61000-3-2
Power-on LED indicators.

PRECISE: Output ripple < 3mV rms.
COMPLIANT: EN 61000-3-2. Built-in active power factor corrector (PFC).
PRACTICAL: Output voltage adjustable from 10 to 15 V.
- ON/OFF switch, power-on and output fault indicators.
PROTECTED: Short-circuit protection.
- Temperature-controlled fan cooling.

Voltage
• Floating outputs on 4 mm safety sockets.
• Output voltage: adjustable from 10 to 15 V.
• Regulation: < 25 mV for a load variation from 0 to 100%.
< 1mV for a line variation from 190 to 253V.
• Ripple: < 3mV rms including:
< 5mV peak to peak of the signal at 100 KHz
< 5mV peak to peak of the signal at 100 Hz
< 40mV peak to peak of switching spikes
• Hold-up time: 25 ms at half load and 12 ms at full load (190 V line input).
• Indicator: green power-on LED.
"status, output fault" red LED.
Current
• Max I: 10.5 A in short-circuit condition.
10 A from 10 to 15 V
Power
• Max output power: 150 W.
Protection
• Against short circuit by current limiting.
• Against overcurrent on the mains input, by fuse.
• Against overload by voltage limiting to 17 V.

Other specifications

• Safety: Class II, double insulation, according to EN 61010-1.
• EMC: Complies with EN 61326-1, performance criterion B, and
EN 55011, ISM Group I, Class B.
• Protection level: IP 30.
• Input voltage: 190 to 253 volts, 50 / 60 Hz.
• Mains input: C8 socket with CEI320 C7 cable (2 poles, double insulation).
• Power consumption: 170 W max.
• Power factor: 0.99 (built-in PFC).
• ON/OFF control: toggle switch
• Dielectric strength: 3000 Vac between input and output.
• Presentation: metal case with epoxy finish.