Multi-Output DC and AC Power Supply 120W - AL 834A
Multi-Output DC and AC Power Supply 120 WATTS - AL 834A. 6, 12 V / 10 A; 24 V / 5 A AC / DC. AC outputs protected by auto-reset thermal circuit-breakers. DC and AC voltages available simultaneously.
Description
Multi-Output DC and AC Power Supply 120 WATTS - AL 834A
6, 12 V / 10 A
24 V / 5 A
AC / DC
AC outputs protected by auto-reset thermal circuit-breakers
DC and AC voltages available simultaneously.
COMPLETE: DC and AC voltages available
simultaneously.
PRACTICAL: No common reference.
PROTECTED: The DC output is protected
by fold-back current limiting. The AC outputs
are protected by auto-reset thermal
circuit-breakers.
DC outputs
• Floating outputs on 4 mm safety sockets.
• Three switchable outputs: 6 V, 12 V or 24 V.
• Accuracy: ± 1%
• Regulation: < 40 mV at 6 and 12 V outputs for a load variation from 0 to 100%.
< 20 mV at 24 V output for a load variation from 0 to 100%.
• Ripple: < 5 mV peak to peak or 1,8 mV rms.
• Internal resistance: < 4 mΩ.
Current
• Max I: 10 A at 6 or 12 V output.
5 A at 24 V output.
Protection
• Short-circuit protection by fold-back current limiting, allowing a continuous short
circuit without overheating.
AC outputs
• Floating outputs on 4 mm safety sockets.
• Three outputs with a common point.
• Voltages: 6 volts, 12 volts and 24 volts ± 10%.
• No-load voltage 5% maximum.
Current
• Max I: 10 A at 6 and 12 V outputs.
5 A at 24 V output.
Protection
• Secondary overcurrent protection by auto-reset thermal circuit-breakers.
Precautions
• The AC and DC circuits can be used simultaneously, but with a max power of
120W.
Other Specifications:
• Safety: Class I, enhanced safety between mains input and outputs.
Complies with EN 61010-1, overvoltage category II, pollution
degree 2.
• EMC: Complies with EN 61326-1, performance criterion B, and
EN 55011, ISM Group I, Class B.
• Transformer primary overcurrent protection by fuse.
• Input voltage: 230 V ±10%, 50 / 60 Hz.
• Mains input: C14 socket with C13 cable (2 poles + earth).
• Power consumption: 250 VA max.
• Dielectric strength: 3700 V from input to output,
2200 V from input to chassis.
• Presentation: screen-printed polycarbonate front panel, metal case,
epoxy finish.
Delivery and Installation
Before shipment, our products are inspected and packed in special impact-resistant packaging, and are delivered safely to every province of Türkiye.
Installation: In laboratory and classroom projects, installation and commissioning after delivery are carried out by our expert team.
Training and support: User training and after-sales technical support are provided for experiment sets and simulators.