Switched Adjustable DC Power Supply 300W - ALF2412

Switched Adjustable DC Power Supply 300 WATTS - ALF2412. 24 V (adj. 20 to 30 V) / 12.5 A (adj. 20 to 30 V / 12.5 A). POWERFUL: can be paralleled n+1 (600, 900, 1200 W...) thanks to Parallel Active Mode. COMPLIANT: EN61000-3-2, built-in active power factor corrector (PFC).

Ask About This Product

Description

Switched Adjustable DC Power Supply 300 WATTS - ALF2412
24 V (adj. 20 to 30 V) / 12.5 A
(adj. 20 to 30 V / 12.5 A)
POWERFUL: can be paralleled n+1 (600, 900, 1200 W...)
thanks to Parallel Active Mode
COMPLIANT: EN61000-3-2, built-in active power factor corrector (PFC)
PRACTICAL: ON/OFF switch
Power-on LED indicators
QUIET: temperature-controlled fan cooling

PRECISE: Output ripple < 3mV rms.
COMPLIANT: EN 61000-3-2. Built-in active power factor corrector (PFC).
PRACTICAL: Output voltage adjustable from 20 to 30 V.
15 A at 20 V and 10 A at 30 V.
POWERFUL: can be paralleled n+1 (Parallel Active Mode).
PROTECTED: against short circuit.
QUIET: temperature-controlled fan cooling.

Voltage
• Floating outputs on 4 mm safety sockets.
• Output voltage: adjustable from 20 to 30 V with fine adjustment.
• Regulation: < 40 mV for a load variation from 0 to 100%.
< 1 mV for a line variation from 190 to 253 V.
• Ripple: < 3 mV rms including :
< 5 mV peak to peak of the signal at 100 KHz
< 3 mV peak to peak of the signal at 100 Hz
< 40 mV peak to peak of switching spikes
• Internal resistance: < 4 mΩ.
• Hold-up time: 25 ms at half load and 12 ms at full load
(190 V line input).
• Indicator: green power-on LED.
overheat or overvoltage red LED indicator.
Current
• Max I: 15.5 A in short-circuit condition.
15 A at 20 V, 12.5 A at 24 V, 10 A at 30 V.
Power
• Constant output power: 300 W from 20 to 30 V.
Paralleling mode
• Load share controller (1 wire) on 2 mm safety sockets.
Protections
• Against short circuits, by current regulation.
• Against overcurrent on the mains input, by internal fuse.
• Against output overload, by voltage limiting to 33 V.
• Against overheating, by controlled fan.

Other Specifications

• Safety: Class II, double insulation, complies with EN 61010-1.
• EMC: Complies with EN 61326-1, performance criterion B, and
EN 55011, ISM Group I, Class B.
• Protection level: IP 30.
• Input voltage: 190 to 253 volts, 50 / 60 Hz.
• Mains input: C8 socket with CEI320 C7 cable (2 poles, double insulation).
• Power consumption: 360 W max.
• ON/OFF control: toggle switch
• Power factor: 0.99 (built-in PFC).
• Dielectric strength: 3000 V between input and output.
• Presentation: metal case with epoxy finish.