AC Power Supply and DC Rectifier 6V 20A 12V 10A DC and AC 120W

AC Power Supply and DC Rectifier 6 V 20 A 12 V 10 A DC and AC 120 WATTS - AM061210. 6 V, 12 V / 5 A AC / DC. Power: 120 watts. AC outputs protected by auto-reset thermal circuit-breakers. DC and AC voltages available simultaneously.

Ask About This Product

Description

AC Power Supply and DC Rectifier 6 V 20 A 12 V 10 A DC and AC 120 WATTS - AM061210
6V, 12V / 5A
AC / DC
Power: 120 watts

AC outputs protected by auto-reset thermal circuit-breakers
DC and AC voltages available simultaneously.
COMPLETE: rectified DC and AC voltages available
simultaneously.
PRACTICAL: AC and DC power-on indicators.
PROTECTED: The DC rectifier output and the AC
outputs are protected by auto-reset thermal
circuit-breakers.

DC outputs
• Floating outputs on 4 mm safety sockets.
• Two switchable outputs: 6 volts or 12 volts.
• Rectified voltage only
• Indicator: green power-on LED.
Current
• Max I: 20 A at 6 V output.
• : 10 A at 12 V output
Protection
• Short-circuit protection by current limiting,
• Overcurrent protection on the source by fuse on the mains input
AC outputs
• Floating outputs on 4 mm safety sockets.
• Two outputs with a common point.
• Voltages: 6 volts and 12 volts ± 5%.
• No-load voltage 10% maximum.
• Indicator: green power-on LED.

Current
• Max I: 20 A at 6 V output.
• or 10 A at 12 V output
Protection
• Short-circuit and overcurrent protection by auto-reset thermal
circuit-breakers.
Precautions
• The power supply's max. power is 120 watts
• The AC and DC outputs can be used simultaneously on circuits without
a common reference.

Other Specifications:

• Safety: Class II, double insulation
Complies with EN 61010-1, overvoltage category II, pollution
degree 2.
• EMC: Complies with EN 61326-1, performance criterion B, and
EN 55011, ISM Group I, Class B.
• Input voltage: 230 V ±10%, 50 / 60 Hz.
• Mains input: fixed double-insulated 2-pole cord.

• Power consumption: 145 VA max.
• Protection: against overcurrent at the input by fuse
• Protection level: IP 30
• Dielectric strength: 3000 V between input and output.
• Presentation: metal case with epoxy finish