Programmable Power Supply 2 Outputs 390W - ALR3206D

Programmable Power Supply, 2 Outputs, 390 WATTS - ALR3206D 2x 0-32V 0-6A or 1x (+-) 0+32V 0-6A or 1x 0-64V 0-6A or 1x 0-32V 0-12A

Ask About This Product

Description

2x 0 - 32V / 0 - 6A or

1x + 0 - 32V / 0 - 6A or

1x + 0 - 64V / 0 - 6A or

1x + 0 - 32V / 0 - 12A

Power: 390 watts

LARGE GRAPHIC DISPLAY
Touch-sensitive keypad, TOUCH
CONNECTED : USB, RS485 and 0-10 V, isolated

LABVIEW

PERFORMANCE : Rear-panel output used for remote sensing

COUPLING : Auto mode: series, parallel, tracking
FUNCTIONS : square, positive and negative ramp,
rise or fall time
ELEGANT : new, lightweight design
SPACE SAVING : compact vertical case
PRACTICAL : lightweight, with built-in handle and cord
storage area.
QUIET : silent, temperature-controlled fan cooling
LOCKING : configuration & "standby"

• Floating outputs: on 4 mm safety terminals on the front panel
and on a lever-operated spring terminal block for 2 mm² on the rear panel.
• Automatic constant voltage and current operation.

Protections
• Against short circuits, by current regulation.

• Against overtemperature, by fan and thermal circuit breaker.
• Against overcurrent on the mains input, by internal fuses.
Miscellaneous and functions
• Display: graphic LCD, 128 x 64 pixels with white backlight.
Display of all parameters (CV, CC, RMT, etc.)
• Memory: 16, including 15 configurable.
• OVP/OCP: protection against overvoltage and overcurrent, adjustable from 0 to max.
• Functions: 5 functions available on U or I
(square, positive and negative ramp, rise or fall time),
time adjustable from 10 ms to 100 s.
• Remote sensing: 4-wire mode on the rear terminal blocks.
Compensation of voltage drop in the leads: 2 V
• Standby: output enable/disable and power supply standby.
Interfaces
All interfaces are isolated from the output (150 V max).
• USB and RS485 as standard.
• Standard LabVIEW drivers.
• Analogue control 0 – 10 V: by direct input 0 - 10 V for U on each channel
or for U & I on channel 1
or a 10K potentiometer or 10K adjustable resistance.
On removable screw terminal blocks at the rear.
• Safety: Class I, enhanced safety between mains input and outputs.
Complies with EN 61010-1, CAT II.
• EMC: complies with EN 61326-1 and EN 55011.
• Input voltage: 220 - 240 volts ±10%, 50 / 60 Hz.
• Mains input: C14 socket with C13 cable, 2 poles + earth
• Power consumption: 475 W max.
• Efficiency: > 81% at maximum power.
• Operating temperature: +5 to +40°C.
• Temperature coefficient /°C: 0.01% for voltage and current.
• Voltage to earth: 100 V max.
• Presentation: front panel with touch-sensitive keypad, rear panel with