0.01 Hz - 0.5 MHz Function Generator - GF 467F

0.01 Hz 0.5 MHz Function Generator - GF 467F. Function generator 5 MHz - Interfaces: RS232, USB*, LabVIEW - Frequency range: 0.01 Hz to 5 MHz - Very high sine quality - 50 ohm and TTL outputs protected up to ±60 V - Internal or external reciprocal frequency counter.

Ask About This Product

Description

0.01 Hz 0.5 MHz Function Generator - GF 467F
Function generator 5 MHz
- Interfaces: RS232, USB*, LabVIEW
- Frequency range: 0.01 Hz to 5 MHz
- Very high sine quality.
- 50 ohm and TTL outputs protected up to ±60 V.
- Internal or external reciprocal frequency counter, 50 MHz.
* USB-RS232 option
COMPLETE: reciprocal frequency counter 50 MHz.
- Internal linear or logarithmic sweep, and external
VCF or FM modulation. AM modulation.
- CMOS function.
- Independent attenuator offset.
PRECISE: high waveform quality.
- Continuously variable duty cycle on all ranges.
PROTECTED: 50 Ω and TTL outputs protected
against reverse power surges of up to ±60 V.
EASY: display of all parameters.

Functions
• Triangle, sine, square, ramp, pulse, offset, CMOS, internal linear or
logarithmic sweep, external VCF or FM modulation, AM modulation.
• Frequency range: 0.01 Hz to 5 MHz in 8 ranges.
• Frequency adjustment: thumbwheel switch with 3 steps (coarse, medium, fine).
Resolution: < 0.04% of the range.
Waveform characteristics
• Sine-wave distortion: < 1% and harmonics less than < -30 dB.
• Triangle linearity error: 1% max (up to 100 kHz).
• Square-wave rise or fall times: 30 ns max (10 to 90%).
Duty cycle
• Calibrated: to 50% ± 1%.
• Variable: continuously from 20 to 80% on all ranges and for all
waveforms. Resolution: 1% step
Frequency sweep
• Internal: linear or logarithmic, sweep time adjustable from
10 ms to 5 s and depth adjustable from 1 to 100.
Start, stop and dwell frequency setting.
Ramp output on BNC socket, 1 V into 35 kΩ.
• External: input on BNC socket, input impedance: 47 kΩ ± 10%,
protection: ± 60 V max. Bandwidth: DC to 20 kHz.
500:1 ratio: for a variation from 0 to -10 V (± 1 V).
1:500 ratio: for a variation from 0 to +10 V (± 1 V).
Amplitude modulation
• Internal: 440 Hz frequency. Depth: 4 steps at 25, 50, 75 or 100%
• External: input on BNC socket. Depth: 1 V rms = 100% for 10 V pp.
Frequency counter
• Frequency range: 0 to 50 MHz in 8 automatic ranges.
Reciprocal reading for very low frequencies.
• Display: 14 mm, 5-digit red LEDs.
• External input: impedance: 1 MΩ / 20 pF
Typical sensitivity: 10 mV rms
• Direct reading of the frequency in internal position.
• Accuracy up to 100 kHz: ± 0.025% ±1 digit.

Main output (protected against short circuits and up to
±60 V reverse power surges)
• Output impedance: 50 Ω, accuracy: ± 5%.
• Output level: 20 V peak to peak (open circuit),
10 V peak to peak into 50 Ω.
• Fixed attenuation: 0, -20 dB or -40 dB, switchable.
• Variable attenuation: 0 dB to -40 dB + DC function
• Resolution: 100 mV at 0 dB, 10 mV at -20 dB and 1 mV at -40 dB
• Offset voltage: independent of the fixed attenuator,
adjustable ± 10 V (open circuit), ± 5 V into 50 Ω
resolution: 100 mV
CMOS function: output signal shifted into the positive range.
Adjustable from 0 to ± 10 V in open circuit.
TTL output (protected against short circuit and up to
±60 V reverse power surges)
• Synchronous square-wave signal, 0 to 5 V. Fan-out: > 10.
• Rise and fall times: < 20 ns.

Other Specifications
• Safety: Class II, toroidal Safety Extra Low Voltage (SELV) transformer.
Complies with EN 61010-1, overvoltage category II, pollution degree 2.
• EMC: complies with EN 61326-1.
• Protection level: IP 31.
• Interface: RS232 link, 9-way male SUB-D plug. LabVIEW drivers
can be downloaded from www.elc.fr
• Input voltage: 230 V ±10%, 50 / 60 Hz; protected by a 200 mA time-delay fuse.
• Mains input: fixed cable with 2 poles.
• Power consumption: 30 VA max.
• Dielectric strength: 3000 V from input to output.
• Presentation: screen-printed polycarbonate front panel, metal case, with feet.