11 µHz - 12 MHz Function Generator - GF 266

11 µHz - 12 MHz Function Generator - GF 266. DDS function generators, 11 µHz to 12 MHz - Interfaces: RS232, USB*, LabVIEW - Very high frequency accuracy (0.005%) with display over 4 or 10 digits - Very high sine quality (low distortion) - Adjustable duty cycle.

Ask About This Product

Description

11 µHz - 12 MHz Function Generator - GF 266
DDS function generators, 11 µHz to 12 MHz
- Interfaces: RS232, USB*, LabVIEW
- Very high frequency accuracy (0.005%)
with display over 4 or 10 digits.
- Very high sine quality (low distortion). <0,1 %).
- Storage for 14 setups and parameters.
- 50 ohm and TTL outputs protected up to ±60 V.
*USB-RS232 option
PRECISE: very high frequency accuracy (0.005%)
with display over 4 or 10 digits.
- Very high sine quality (low distortion). <0,1%).
- Duty cycle: adjustable from 10 to 90%.
COMPLETE: internal or external AM, FM, FSK and PSK
modulation schemes.
- Internal linear or logarithmic sweep
- 0.8 Hz to 100 MHz external frequency meter.
- Offset independent of the attenuator
PROTECTED: 50 Ω and TTL outputs protected up to ±60 V.
EASY: storage for 14 setups and parameters.

Functions
• Sine: frequency range 11 μHz to 12 MHz.
Distortion at 2 V <0,1% up to 20 KHz and harmonics <-30dB.
• Square: frequency range 11 μHz to 12 MHz.
Square-wave rise or fall times: 25 ns max (10 to 90%).
Duty cycle calibrated to 50% ± 1% and continuously
variable from 10 to 90%.
• Triangle: frequency range 11 μHz to 12 MHz. Linearity <1% (up to 100KHz).
• Ramp: frequency range 22 μHz to 5 MHz, rising or falling.
Linearity <1% (up to 100 KHz)
• Pulse: square-wave signal adjustment at the minimum
• DC: ± 10 V (open circuit), ± 5 V into 50 Ω
• Frequency adjustment: thumbwheel switch with selected-digit
increment or decrement.
• Frequency display: 10 digits in extended mode,
4 digits in standard mode.
• Accuracy: ±50 ppm +10 μHz.
Frequency sweep
• Internal: linear or logarithmic, sweep time adjustable
from 10 ms to 10 s.
Sweep from 0.372 Hz to maximum frequency.
(F stop min = F start +100 Hz. Step of 10 Hz).
Start synchronisation of the ramp output on BNC socket.
Modulation
Internal sine-wave AM, FM, PSK, FSK up to 800 Hz.
External on BNC socket, input impedance: 10 kΩ.
• AM: internal, modulation depth settable to 25, 50, 75 or 100%.
External, bandwidth DC to 20 kHz, 1 V rms = 100%.
• FM: deviation adjustable from 100 Hz to Fmax,
bandwidth DC to 5.6 kHz.
• FSK: adjustable from 100 Hz to Fmax, bandwidth DC to 20 kHz.
• PSK: phase adjustable from 0 to 360°, bandwidth DC to 20 kHz.
Main output (protected against short circuits and up to ±60 V
reverse current surges)
• Output impedance: 50 Ω, accuracy: ± 5%.

• Output level: 20 V peak to peak (open circuit), 10 V peak to peak into 50 Ω.
• Amplitude variation: from 0.1 to 1 dB depending on frequency
• Fixed attenuation: 0, -20 dB and -40 dB, switchable.
• Variable attenuation: 0 to -20 dB.
• Offset voltage: ± 10 V (open circuit), ± 5 V into 50 Ω, independent
of the attenuator.
TTL output (protected against short circuits and up to ±60 V
reverse current surges)
• Synchronous square-wave signal, 0 to 5 V. Fan-out: > 10.
• Rise and fall times: < 10 ns.
Frequency counter
• Frequency range: 0.8 Hz to 100 MHz in 5 automatic ranges
0.8 Hz to 25 MHz and 1 range from 25 to 100 MHz.
• Display over 5 digits.
• Input on BNC socket, impedance: 1 MΩ/20 pF
• Typical sensitivity: 25 mV rms.
• Accuracy: ± 0.025% ±1 digit.

Other specifications

• Parameter display: 2 lines of 16 characters.
• Parameter memory: storage of 14 configurations.
• Interface: RS232 link, 9-way male SUB-D plug. LabVIEW drivers
can be downloaded from www.elc.fr
• Safety: Class I, complies with EN 61010-1, overvoltage category II,
pollution degree 2.
• EMC: complies with EN 50082-1, performance criterion B
and EN 55011, ISM group I, class B.
• Input voltage: 230 V ±10%, 50 / 60 Hz; protected by a 200 mA time-delay fuse.
• Mains input: EEC socket with 2 poles + earth.
• Power consumption: 30 VA max.
• Dielectric strength: 2300 V from input to output,
1350 V from input to chassis.
• Presentation: screen-printed polycarbonate front panel, metal case,
epoxy finish, feet.