Engine Management System Bosch Motronic (FSI) MSFSI02
Ask About This ProductDescription
The Bosch Motronic (FSI) MSFSI02 engine management system training stand offers a hands-on learning experience of the modern car by showing how a direct petrol injection system works. This special device contains all the engine management components found in a real car, such as the fuel supply, exhaust and ignition systems, helping users understand how these parts interact.
Features
- Includes high- and low-pressure fuel supply systems and an ignition system with air-fuel mixture.
- Includes the full electrical wiring diagram of the direct petrol injection system (FSI): you can read and understand electrical diagrams and component markings and use this knowledge for troubleshooting and repair on modern vehicles.
- Analyses direct petrol injection circuits and the operation of the ignition and fuel supply systems.
- Measures the fuel injection quantity, injector spray pattern quality, the fuel pump's low fuel pressure, more than 20 electrical parameters via banana-plug connectors, the electrical signal parameters of each component, the ignition system's high-voltage circuit and much more with multiple diagnostic tools.
- Shows the synchronisation between the crankshaft and camshaft.
- Allows manual adjustment of crankshaft speed, lambda sensor values, engine and radiator coolant temperatures, NOx sensor values (depending on the system), exhaust gas temperature (depending on the system), intake manifold pressure and intake air temperature.
- Displays voltage readings from various electronic system components, including the exhaust gas recirculation potentiometer, accelerator pedal position sensors, intake manifold flap potentiometer, fuel pressure sensor, throttle potentiometers, intake manifold pressure sensor, engine operating temperature sensor, coolant temperature sensor and exhaust gas temperature sensor.
- Simulates circuit faults by removing jumpers or setting parameters to incorrect values.
- Uses the standard OBD II 16-pin diagnostic connector to read information from the ECU, read/clear fault codes, display operating system parameters (live data), activate actuators (depending on the control unit), adapt the throttle, code/configure the control unit and monitor other parameters.
- An electric vacuum pump is provided for the intake manifold flaps (ordered separately).
Value for Students
- Provides easy, safe and comfortable training that builds confidence, using OEM components for a realistic vehicle repair experience.
- Understanding modern engines: gain practical experience with direct petrol injection systems and understand the interaction between the fuel supply, exhaust and ignition systems.
- Electrical circuit skills: study and analyse the electrical circuits of direct petrol injection engine components, and learn and understand the wiring diagrams and the components presented on the stand.
- Fuel system analysis: understand and analyse high- and low-pressure fuel supply systems, the quantity of fuel injected and spray pattern quality. The low-pressure fuel pump is visible so its operation can be seen.
- Ignition system: understand the operation and troubleshooting of modern ignition systems.
- Synchronisation skills: show and understand the synchronisation between the crankshaft and camshaft in engine operation.
- Parameter measurement: use the banana-plug connectors to monitor and measure electrical parameters with a real-time data oscilloscope, multimeter or scan tool, or view parameters on the TFT voltmeter fitted to the stand panel.
- Fault simulation: develop your skills in simulating and diagnosing more than 20 system circuit faults by disconnecting banana-plug connectors, to learn troubleshooting.
- Integrated simulators allow component parameters to be changed: lambda probe signal simulation; engine operating temperature simulation; NOx sensor parameter simulation (depending on the system); exhaust gas temperature sensor simulation; intake manifold pressure sensor simulation;
- Manual adjustment skills: adjust key engine parameters such as crankshaft speed, sensor values, air flow rate and temperatures using the potentiometer and simulators.
- Sensor data interpretation: read and interpret voltage signals from various engine sensors for accurate diagnosis on live data. Measure the high-voltage circuit of the ignition system. The training board has a full electrical wiring diagram of the direct petrol injection system (FSI). Control unit coding/configuration capability.
- Diagnostic skills: use the OBD II 16-pin diagnostic connectors for ECU identification, fault code management, real-time parameter monitoring, throttle calibration and more.
Value for Instructors
- Provides easy, safe and comfortable training that builds confidence, using OEM components for a realistic vehicle repair experience.
- Space-saving, functional and durable design: compact and vertically oriented for better mobility and efficient use of classroom space. Durable, lightweight construction with a sturdy aluminium frame for long life and safe use. Enclosed panels and internal wiring make use safe and prevent accidental damage to sensitive stand parts.
- OEM automotive components: uses OEM automotive parts for an authentic, practical learning experience. Students gain real experience with all the parts and functions, as in real cars.
- Effective demonstrations: use advanced, hands-on training equipment to demonstrate key automotive systems and their diagnostics.
- Enhance learning: easier real-time monitoring and fault simulation to develop students' understanding and troubleshooting skills.
- Professional preparation: the Audi/VW OEM-based system lets students train in diagnostics using almost any multi-brand, specialist or OEM scan tool, providing a safe, high-quality learning environment.
- Multi-student accessibility: the space-saving, portable version on wheels allows several students to use it at the same time, encouraging collaborative learning and hands-on training.
- Easy set-up: the training stand is designed for simplicity, needing only minor adjustments to reset to default parameters, which makes it quick and efficient to prepare for and start each lesson.
Features
- Dimensions: 1820 x 1360 x 500 mm (71.65 in x 53.54 in x 19.69 in)
- Weight: approximately 105 kg (230 lb)
- Power supply: ~230 V/110 V (US version)
- Product number: MSFSI02
Optional equipment (sold separately)
- TXT MULTIHUB CAR diagnostic scan tool
- AutoCOM ICON diagnostic scan tool
- NANO S TEXA diagnostic scan tool
- VCDS HEX-NET Pro diagnostic scan tool
- TEXA uniprobe diagnostic tool
- Diagnostic tool: Automotive Diagnostic Kit ADK5004D TiePie
- Diagnostic tool: Foxwell OS100 oscilloscope
Delivery and Installation
Before shipment, our products are inspected and packed in special impact-resistant packaging, and are delivered safely to every province of Türkiye.
Installation: In laboratory and classroom projects, installation and commissioning after delivery are carried out by our expert team.
Training and support: User training and after-sales technical support are provided for experiment sets and simulators.